Beko BD-610 - Manual (Page 20)

2. Press Scrolling button and Left key
to select Phone settings;
3. Press Scrolling button and Left key
to select Auto-talk;
4. Press Scrolling button and Left key
to select Off / On.
e Base Settings
Note:
If you have turned Auto-talk on, do not
press the Call button after you've
answered a call by lifting the handset,
othen/vise, you'll disconnect the call.
To Set Base Ringer
You are allowed to set the melody,
volume of your Dect phone base here.
To set Ringer Volume (1 -9 melody)
1. Press Scrolling button and Left key
to select Settings under main menu
mode;
2. Press Scrolling button and Left key
to select Cordless settings;
3. Press Scrolling button and Left key
to select Base settings;
4. Press Left key to select Ringer
Settings;
5. Press Left key again to select Ringer
Volume;
6. Press Scrolling button up/down to
change the volume level, then press Left
key to confirm your setting.
If you wish to set the Ringer Melody, this
is easily done here.
Dial Settings
You are allowed to set flash time, auto
pause and dial mode here.
To Set Flash Time
1. Repeat 1 -3 steps above;
2. Press Scrolling button and Left key
to select Dial Settings;
3. Press Left key to select Flash Time;
4. Press Scrolling button and Left key
or just Left key to select your preferred
flash time (Short, Long).
To Sat Auto Pause
When you call a number with a pause,
the phone waits a few seconds before
transmitting the next digits in the dialing
sequence. This Is useful when you have i
1B
to dial a number for access to an outside
line, or for going into a voicemail system.
You are allowed to set one number in
Auto Pause.
1. Press Scrolling button and Left key
to select Auto Pause under Dial Setting
mode;
2. Use the keypad to input the PIN
(0000), press Left key to confirm;
3. Use the keypad to input the number
(for exampte “123") you want to set auto
pause, press Left key to confirm. When
you dial number “123456", the pause
will happen between “123" and “456".
To Set Dial Mode
1. Press Scrolling button and Left key
to select Dial Mode under Dial Setting
mode;
2. Press Scrolling button and Left key
or just press Left key to select your
preferred mode (Pulse, Tone).
To Set Call Barring
Call barring enables you to restrict or
bar certain types of calls from your
phone.
1. Press Scrolling button and Left key
to select Settings under main menu
mode;
2. Press Scrolling button and Left key
to select Cordless settings;
3. Press Scrolling button and Left key
to select Base settings;
4. Press Scrolling button Left key to
select Call Barring;
5. Use the keypad to key in the PIN
(0000), press Left key to confirm;
6. Press Scrolling button Left key or just