Beko BK 6340 Y - Manual (Page 19)

Exchange oven lamp Troubleshooting
DANGER
Hot surfaces may cause burns!
Make sure that the device is
switched off and cooled down in
order to avoid the risk of an
electrical shock.
The oven lamp is a special heat-resisting (T
300 °C) electric light bulb; see Technical
Data, page 5. Oven lamps can be obtained
from service agent.
1 .
2 .
Switch off the current.
Unscrew glass cover.
3. Unscrew oven lamp and replace it by a
new one.
4. Refit the glass cover.
Electrical equipment
DANGER
Risk of eiectric shock, short
circuit or fire by unprofessionai
repairs!
Repairs on the unit must be carried
out by the technical service or a
qualified electrician.
DANGER
Risk of expiosion or poisoning
by unprofessionai repair.
Repairs on the unit must be carried
out by the technical service or a
qualified technician.
* •
Normai operating conditions
• Smoke and smell may emit for a
couple of hours during the first
operation.
• It is normal that steam escapes during
operation.
• When the metal parts are heated, they
may expand and cause noise.
You can solve the following problems
yourself. Before you caii the technicai
service, piease check the foiiowing
points.
Malfunction/probiem Possible cause Advice/remedy
The unit does not work. The fuse is defective or
deactivated.
Check fuses in the fuse box.
If necessary, replace or
reactivate them.
Product's plug can not be
connected to the grounded
socket.
Check the plug connection.
Oven light is not on. Oven lamp is defective. Replace oven lamp.
No current. Check fuses in the fuse box.
If necessary, replace or
reactivate them.
19 I EN