Beko BK 6340 Y - Manual (Page 12)

DANGER
Risk of explosion!
Before starting any work on the
gas installation, please shut the
gas supply.
Pressure and type of the gas supplied
from the local distribution center must
correspond to the data specified on
the rating plate or gas type indication
label of the unit.
#
NOTICE
Your cooker adjusted for LP gas.
Connecting the gas hose
• If necessary, interchange the sharp
hose at the rear of your oven tip with
the plug by selecting a suitable place
on basis of the location of the gas
bottle.
1
2
Plug
Hose nozzle
Have your appliance connected in a
way that it will be close to the gas
connection and avoid gas leakage.
Plastic hose to be used must not be
longer than 125 cm.
Install the clamp to the hose. Soak one
end of the hose (15 mm inner diameter)
into boiling water for one minute to
soften it.
Than, slip the softened end of the hose
completely onto the sharp hose end of
your appliance. Finally, tighten the
clamp completely by a screwdriver.
Repeat the same procedure for the
other end of the hose and complete
the gas bottle connection.
Never forget to make the gas leakage
control.
DANGER
Risk of explosion and
suffocation!
LPG bottles must not be stored in
the house.
If you need to use your appliance later
with a different type of gas, you must
consult the authorised service for the
related conversion procedure.
12 I EN