Beko BK 6340 Y - Manual (Page 14)

DANGER
Risk of electric shock!
Before starting any work on the
electrical installation, please
disconnect the product from the
mains.
• Push unit to the kitchen wall.
• To align the unit with the worktop,
adjust the feet turning right or left hand
as required.
Final check
1. Check electrical functions.
2. Open gas supply.
3. Check gas installations for secure fitting
and tightness.
4. Ignite burners and check appearance of
the flame.
Important
The flames should be blue and
burn smoothly. If the flames
appear yellowish, check secure
position of the burner cap or clean
the burner.
Initial operation
First cleaning of the product
NOTICE
The surface might get damaged by
some detergents or cleaning
materials.
Do not use aggressive detergents,
cleaning powder/milk or any sharp
objects.
1. Remove all packaging materials.
2. Wipe the surfaces of the product with a
damp cloth or sponge and dry with a
cloth.
Initial heating
WARNING
Hot surfaces may cause burns!
Do not touch the hot surfaces of
the unit. Keep children away from
the unit and use oven gloves.
• ^ Important
Smell and smoke may emit during
first heating. Ensure well
ventilation.
Any production residues or conservation
layers must be burnt before the first use.
Heat up the device for about 30 minutes
and then switch it off.
Electric oven
1. Take all baking trays and racks from the
oven.
2. Close oven door.
3. Select the highest temperature with the
thermostat knob; see How to use the
electric oven, page 16.
4. Heat approximately 30 minutes.
5. Switch off oven; see How to use the
electric oven, page 16
14 1 EN