Analog Devices AD604 - Manual (Page 28)

OUTLINE DIMENSIONS
1.280 (32.51)
---------- 1.250 (31.75)------------------- •
1.230 (31.24)
0.280 (7.11)
0.250 (6.35)
0.240 (6.10)
0.100 (2.54)
BSC
0.210 (5.33)
MAX“"
0.015
(0.38)
MIN
0.325 (8.26)
0.310 (7.87)
0.300 (7.62)
0.060 (1.52) -j
MAX^
0.015 (0.38) ^
AUGE-I
0.014 (0.36)
SEATING
PLANE
^0.005 (0.13)
MIN
GAUGE -
PLANE
5f°
0.195 (4.95)
0.130 (3.30)
115 (2.92)
0.430 (10.92)
MAX
0.014 (0.36)
-0.010 (0.25)
0.008 (0.20)
0.070 (1.78)
0.060 (1.52)
0.045 (1.14)
COMPLIANT TO JEDEC STANDARDS MS-001
CONTROLLING DIMENSIONSARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES)ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLYAND ARE NOT APPROPRIATE FOR USE IN DESIGN.
CORNER LEADS MAY BE CONFIGURED AS WHOLE OR HALF LEADS.
Figure 62.24-Lead Plastic Dual In-Line Package [PDIP]
Narrow Body
(N-24-^ /
Dimensions shown in inches and (millimeters)
www.B^I IC.com/ADI
15.20 (0.5984) '
f i n n f l f l R R f l f l R R n
24 13
1
O 12
7.60 (0.2992)
7.40 (0.2913)
10.65 (0.4193)
10.00 (0.3937)
__L
0.75 (0.0295)
2.65 (0.1043)
2.35 (0.0925)
T 0.25 (0.0098)
COPLANARITY
0.10
^ U-
1.27 (0.0500)
BSC
-*\U-
0.51 (0.0201)
0.31 (0.0122)
SEATING
PLANE
8°
r
0.33 (0.0130)
0.20 (0.0079)"
-JU-
1.27 (0.0500)
0.40 (0.0157)
COMPLIANT TO JEDEC STANDARDS MS-013-AD
CONTROLLING DIMENSIONSARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 63.24-Lead Standard Small Outline Package [SOIC_W]
Wide Body
(RW-24)
Dimensions shown in millimeters and (inches)
Rev. E | Page 28 of 32
13
12