Grass catcher assembly, To attach bag to mower – Bolens 112-340A User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Lower
Frame
Grass Catcher Assembly
-1.
Join
the
upper
frame
and
lower
assembly as shown in figure 7.
frame
FIGURE 7.
Plastic
Channels
FIGURE 8.
Grass Catcher Frame
2.
Place bag over frame (black plastic side is the
bottom of bag). Upper frame goes to the top of
bag.
-3. Secure bag to frame by slipping plastic chan
nels on bag over frame. See figure 8.
To Attach Bag to Mower
i
WARNING
j
FIGURE 9.
DO NOT operate the mower with the
chute door open unless the com
plete
grass
catcher
is
properly
mounted on the mower.
Attach
the
grass
catcher
frame
to
grass
catcher hitch bracket on rear of the mower by
hooking grass catcher into hooks on grass
catcher hitch bracket. See figure 9.
Lift the rear of grass catcher up. The roller on
the grass catcher will push the chute door on
the mower open. See figure 9.
NOTE
Figure 9 is shown with the chute
door open for photo clarity only.