Minolta X-700 User Manual

Page 58

MOTOR DRIVE 1 and AUTO WINDER G

With M o t o r Drive 1 attached, you can capture the action with single-frame

or continuous operation at either 2 or 3.5 frames per second. The comfortable
handgrip has t w o operating buttons, each w i t h a Minolta " t o u c h s w i t c h " ,

enabling full viewfinder readout for either horizontal or vertical framing.

Auto Winder G lets you focus full attention on the creative aspects of

photography by freeing you from winding the f i l m after each picture.

Continuous sequences up to 2fps are also possible by holding the camera's

operating button d o w n .

Both units are designed to attach quickly and easily without access caps to

remove or store. Their film-advance mechanisms stop automatically at the end

of the roll, and f i l m can be easily loaded and unloaded w i t h o u t removing the

units.

WIRELESS CONTROLLER IR-1 SET

The IR-1 infrared transmitter/receiver set lets you trigger the X-700 from

up to 60m (about 200 ft.) away for remote-controlled single-frame exposures,
continuous sequences, or time exposures. When used with extra receivers, the

three-channel transmitter enables independent operation of up to three

cameras or groups of cameras, or simultaneous operation of an unlimited

number of cameras.