VeriFone Vx570 - Manual (Page 28)

POS Start Guide
Jan 2013 27 VeriFone Functions
Vx610
Instructions for Provider Menu (P2 key)
The VeriFone Vx610 terminal can store up to 20 NPI/MMIS Provider ID numbers
Each Provider number can be used by entering the two-digit shortcut code that
corresponds to the Provider/Individual submitting the transaction. To store additional
Provider numbers in the terminal follow the Step/Action/Display table.
From within the eMedNY application press the RED CANCEL key to return to the initial
screen.
NOTE: If only one Provider ID is entered in the table, it will automatically be used for
each transaction and the prompts “Select Provider”, “Plate Number” and “License Number”
will not be displayed.
How to enter a National Provider Identifier (NPI) or MMIS Number
DISPLAY ACTION
Initial Screen Press the P2 key to enter the Provider
Menu.
SELECT SETUP
1=PROV 2=LIC 3=PLATE
Press the 1 key and press the GREEN
ENTER key.
ENTER PASSWORD Enter ‘123456’ and press the GREEN
ENTER key.
Provider Setup is displayed
ENTER PROVIDER NUMBER
--
Enter a valid two-digit number (01 – 20).
The first shortcut assigned must start
with 01.
NOTE: It is important to keep track of
the shortcuts that correspond with each
Provider ID.