MTD Shredder 642D thru 648D - Manual (Page 2)

IMPORTANT
A
SAFE OPERATION PRACTICES
THIS SYMBOL POINTS OUT IMPORTANT SA iTY INSTRUCTIONS WHICH, IF NOT FOLLOWED, COULD ENDANGER THE PERSON­
AL SAFETY AND/OR PROPERTY OF YOUR 5ELF AND OTHERS. READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO OPERATE YOUR CHIPPER-SHREDDER. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY
RESULT IN PERSONAL INJURY. WHEN YOU 5EE THIS SYMBOL: ^
HEED ITS WARNING.
A
Your chipper-shredder w 3S built to be operated according to the rules for safe operation in this manual.
nAMPPD- power equipment, carelessness or error on the part of the operator can result in
UANubK; serious injury. This chip )er-shredder is capable of amputating lingers and hands and throwing objects.
Failure to observe the fol owing safety instructions could result in serious injury or death.
I. GENERAL OPERATION
1 .
3.
4.
5.
6
.
8 .
10.
11.
Read this owner's guide carefully in its entirety befc re attempt­
ing to assemble this machine. Read, understand, ar d follow all
instructions on the machine and in the manual(s) be fore opera­
tion. Be completely familiar with the controls and the proper
use of the machine before operating it. Keep this i lanual in a
safe place for future and regular reference and f( r ordering
replacement parts.
Your chipper-shredder is a powerful tool, not a plaything.
Therefore, exercise extreme caution at all times. Yc or unit has
been designed to perform two jobs; to chip and sh ed vegeta­
tion found in a normal yard. Do not use it for any other pur­
pose.
Never allow children under age 16 to operate the uni. Children
16 years and older should only operate the unit nder close
parental supervision. Only responsible individuas who are
familiar with these rules of safe operation should be allowed to
use your unit.
Keep the area of operation clear of all persons, f articularly
small children and pets. Stop the engine when the; are in the
vicinity of the unit. Keep work area clean and clear c f branches
or obstacles which could cause you to stumble or fa i.
When feeding material into this equipment, be extre mely care­
ful that pieces of metal, rocks, bottles, cans or oti er foreign
objects are not included. Personal injury or damrge to the
machine could result.
Always wear safety glasses or safety goggles, durint operation
and while performing an adjustment or repair, to piotect eyes
from foreign objects that may be thrown from the mi chine.
Wear sturdy, rough-soled work shoes and close fit ing slacks
and shirt. Shirt and slacks that cover the arms an I legs and
steel-toed shoes are recommended. Do not wear к ose fitting
clothes or jewelry and secure hair so it is abovf shoulder
length. They can be caught in moving parts. Nevei operate a
unit in bare feet, sandals or sneakers. Wear gloves' yhen feed­
ing material in the chipper chute or shredder hopper.
Never place your hands, feet, or any part of your bo iy into the
shredder hopper, chipper chute, discharge openinj, or near
any moving part while the engine is running. Keep t lear of the
discharge opening at all times. If it becomes net essary to
push material into the chipper chute or shredder ho| per, use a
small diameter stick,
NOT YOUR HANDS.
If it is necessary for any reason to unclog the feer intake or
discharge openings or to inspect or repair any fart of the
machine where a moving part can come in contact with your
body or clothing, stop the machine, allow it to cool, i lisconnect
the spark plug wire from the spark plug and move it iway from
the spark plug before attempting to unclog, inspect о' repair.
Do not operate unit while under the influence of ilcohol or
drugs.
The machine should only be operated on a level surff ce. Never
operate your unit on a slippery, wet, muddy or ic/ surface.
Keep your work area clean and clear of branches or obstacles
which could cause you to stumble and fall. Do not iverreach.
Maintaining proper footing and balance is essential t) prevent­
ing accidents.
12.
13.
14.
15.
16.
17.
18.
19.
20
.
2 1
.
22
.
23.
24.
Do not allow an accumulation of processed material to build­
up in the discharge area as this will prevent proper discharge
and can result in kick-back from the chipper chute.
Keep your face and body back from chipper chute to avoid
accidental bounce back of any material.
Do not transport machine while engine is running.
If the cutting mechanism strikes a foreign object or if your
machine should start making an unusual noise or vibration,
immediately stop the engine and allow the machine to come to
a complete stop. Disconnect the spark plug wire and move it
away from the spark plug. Take the following steps.
• Inspect tor damage.
• Repair or replace any damaged parts.
• Check for any loose parts and tighten to assure continued
safe operation.
Never attempt to attach or remove catcher bag when engine is
running. Shut the engine off and wait for the impeller to come
to a complete stop. The impeller continues to rotate for a few
seconds after the engine is shut off. Never place any part of
the body in the impeller area until you are sure the impeller has
stopped rotating.
Muffler and engine become hot and can cause a burn. Do not
touch.
Do not allow leaves or other debris to build-up on engine’s
muffler. The debris could ignite and cause a fire.
Do not attempt to shred or chip material larger than specified
in this manual. Personal injury or damage to the machine
could result.
Do not operate engine if air cleaner or cover over carburetor
air-intake is removed, except for adjustment. Removal of such
parts could create a fire hazard.
Only use accessories approved for this machine by the manu­
facturer. Read, understand, and follow all instructions provid­
ed with the approved accessory.
If situations occur which are not covered by this manual, use
care and good judgment. Contact your dealer for assistance.
Keep discharge chute deflector, chipper chute door, and all
other guards and safety devices in place and operating proper­
ly-
Only operate unit in good daylight. Do not operate unit at night
or in dark areas where your vision may be impaired.
II. CHILDREN
‘Tragic accidents can occur if the operator is not alert to the pres­
ence of small children. Children are often attracted to the chipper-
shredder and the chipping and shredding activity. Never assume
that children will remain where you last saw them.
1. Keep children out of the work area and under the watchful eye
of a responsible adult other than the operator.
2. Be alert and turn the unit off if a child enters the area.
3. Never allow children under the age of 16 to operate the chip­
per-shredder.