beautypg.com

The user’s mode – NordicTrack C2255 NTL07806.2 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

THE USER’S MODE

The console features a user’s mode that keeps track of
the total number of miles that the walking belt has

moved and the total number of hours that the treadmill
has been operated. The user’s mode also allows you

to select miles or kilometers as the unit of measure­

ment and to turn on and turn off the demo mode.

When the user’s mode is selected, you can also

choose an audio setting and a volume setting for your
iFIT workouts.

To select the user’s mode, hold down the Stop button
while inserting the key into the console.

The upper left digit(s) in the
display will show the total
number of hours that the
treadmill has been used.

The lower right digit(s) in the
display will show the total
number of miles (or kilome­
ters) that the walking belt has
moved.

An “E" for English miles or an
“M” for metric kilometers will
appear as the top right digit in
the display. Press the 1 Step
Speed increase button to
change the unit of measure­
ment if desired.

When you use an iFIT Card,
a personal trainer will guide
you through your workouts
and give detailed instructions

if “P” is selected as the audio

setting. If you turn off the “P”
setting, your personal trainer will simply guide you
through your IFIT workouts. Press the 1 Step Incline
decrease button to change the audio setting.

You can adjust the volume of
the personal trainer audio (0
through 5) by pressing the 1
Step Incline increase button

repeatedly. The volume set­

ting appears as the lower mid­
dle digit In the display.

IMPORTANT:

If a "d” appears

next to the “E” or "M,” the con­

sole is in the “demo” mode.
This mode is intended to be

used only when a treadmill is

displayed in a store. When the
console is in the demo mode, the power cord can be

plugged in, the key can be removed from the console,
and the indicators in the display will automatically light
in a preset sequence; the buttons on the console will
not operate.

If a “d” appears when the user’s mode

is selected, press the 1 Step Speed decrease button
so the “d” disappears.

To exit the user’s mode, remove the key from the con­

sole.

18