Attaching the discharge chute to the tractor – MTD 190-063-000 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5. Attach the grass bags using the slots shown in
-------figure 12.
6. Close the cover on the grass collector.
Discharge Chute
ATTACHING THE DISCHARGE CHUTE
TO THE TRACTOR
1. Raise the deck to its highest position. Raise the
chute deflector on the deck. Place the top edge of
discharge chute in position over the chute open
ing on the deck, then push down on discharge
chute so the front edge locks into clip on deck.
------See figure 13.
2. Lock discharge chute in position by hooking
retainer strap over the second clip on the deck.
Chute
Tube
3. Insert the upper end of the chute tube into the
— hole in the cover. See figure 14.
4. Place the lower end of chute tube over the dis
charge chute. See figure 14. Secure by placing
the ends of the retainer straps on the discharge
chute over the retainer clips on the chute tube.