Generac Power Systems 00862-1 - Manual (Page 32)

INSTALLATION CHECK LIST
LOCATION AND SUPPORT ELECTRICAL CONNECTIONS
___ 1. The generator is properly located.
___ 2. The generator is properly supported.
___ 3. The generator is properly restrained.
COMPARTMENT
___ 1. Compartment construction is proper.
___ 2. Holes/openings are vapor-sealed.
___ 3. Compartment size is correct.
___ 4. Compartment is vapor-sealed.
___ 5. Sound insulation is O.K.
___ 6. Floor cutouts properly completed.
COOLING and VENTILATING AIR
___ 1. Air flow is adequate.
___ 2. Air inlet opening is correct.
___ 3. Compensate for restrictions
___ 4. Installation has been tested
GASOLINE FUEL SYSTEM__________________
___ 1. Fuel tank complies with code.
___ 2. Fuel system properly installed.
___ 1. Comply with code requirements.
___ 2. Junction box properly installed.
___ 3. Wiring meets all standards.
___ 4. All connections are correct.
___ 5. Conduit properly installed and sealed.
___ 6. Generator properly bonded to vehicle.
BATTERY INSTALLATION
___ 1. Recommended battery is installed.
___ 2. Recommended cables are installed.
___ 3. Cables are clean and tight.
___ 4. Cables are properly connected.
___ 5. Proper ventilation is provided.
POST INSTALLATION TESTS____________________
___ 1. All tests properly completed.
OPTIONS AND ACCESSORIES_________________________________
Check that remote start/stop panels (if used) are
properly installed.
If an hourmeter kit is installed, check that job was
done properly.
If any other options and accessories are installed,
check that they were installed properly.
EXHAUST SYSTEM____________________________
___ 1. Compiles with code requirements.
___ 2. Properly and safely installed.
DATE OF INSTALLATION
NAME OF INSTALLER
SIGNATURE OF INSTALLER
— 30 —