MTD 24650-9 - Manual (Page 5)

Hopper’^
INSTALLATION OF HOPPER AND UPPER GUIIDE
EXTENSION
1. The lower leaf ramp section on the shredder is
placed in an upright position for shipping
purposes. Lower this section.
2 .
Lower Leaf
Ramp Section
Place the hopper in position on the shredder.
See figure 3. Start all four hex washer head self­
tapping screws (C), then tighten securely using
a 1/2" socket wrench.
FIGURE 3.
3. Assemble the keepers (D) to the sides of the unit
with two hex washer head self-tapping screws (C),
using a 1/2" socket wrench. Tighten securely.
I I
4. Place upper leaf ramp section inside the lower leaf
ramp section. Secure with four hex bolts (A) and
hex lock nuts (B). Tighten securely. See figure 5.