Important, Safe operation practices for power vacuums – MTD 24665L User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
IMPORTANT
-H is suggested that this manual be read in its entirety before attempting to assemble or operate. Keep this manual
a safe place for future reference and for ordering replacement parts.
This unit is shipped WITHOUT GASOLINE or OIL. After assembly, see separate engine manual for proper fuel
and engine oil recommendations.
SAFE OPERATION PRACTICES FOR POWER VACUUMS
1. Read this operating and service instructing manual
carefully. Be thoroughly familiar with the controls
and proper use of the power vacuum.
2.
Never allow children to operate this power
vacuum.
3.
Keep the area of operation clear of all persons,
particularly small children and pets.
4.
Check fuel before starting engine. Do not fill fuel
tank indoors, when engine is running, or while
engine is hot. Wipe off any spilled fuel before
starting engine.
9.
If the power vacuum should become blocked with
debris at any point, shut engine off and wait
until the impeller comes to a complete stop
before attempting to remove the obstruction.
Disconnect spark plug wire to prevent accidental
starting.
10. Check ail bolts for tightness at frequent periods.
11. Never store this power vacuum with fuel in the
tank. Allow engine to cool before storing in any
enclosure.
12. Keep bag and equipment free of debris when not
in use.
5. Do not change engine governor settings.
6.
Do not put hands near rotating parts for any
reason.
7.
if the power vacuum should start to vibrate
abnormally, stop the engine and check immedi
ately for the cause. Vibration is generally a
warning of trouble.
13. Never operate this power vacuum unless air duct
and vacuum bag are properly affixed in their
place. Large zippered end of bag must be closed
when operating to prevent objects from being
blown out.
14. Never empty vacuum bag when engine is running.
15. Never change auxiliary hose attachment when
engine is running.
Before cleaning, repairing or inspecting, make
certain all moving parts have come to a complete
stop. Disconnect spark plug wire and keep wire
away from plug to prevent accidental starting.
Also keep throttle control lever in the stop
position.
16. The manufacturer recommends that the operator
wear safety glasses or some other suitable eye
protection when operating this machine.
17. Check the vacuum bag frequently for wear and
replace when necessary.