beautypg.com

Poulan HDF550K User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

PRODUCT SPECIFICATIONS

GASOLINE CAPACITY:

3 Quarts (2.8L)

Unleaded Regular

OIL (API-SF-SJ):

(Capacity: 20 OZ./0.6L)

SAE30 (Above 32"F/0"C)
SAE 5w-30(Be)ow 32°F/0°C)

SPARK PLUG;
(GAP: .03070.76mm)

Champion RJ19LM

CONGRATULATIONS on your purchase of a new tiller, it

has been designed, engineered and manufactured to give

you the best possible dependability and performance.

Should you experience any problems you cannot easily
remedy, please contact your nearest authorized service

center. We have competent, well-trained technicians and
the proper tools to service or repair this unit.

Please read and retain this manual. The instructions will

enable you to assemble and maintain your tiller properly.
Always observe the “SAFETY RULES”.

CUSTOMER RESPONSIBILITIES

Read and observe the safety rules.

Follow a regular schedule in maintaining, caring for and

using your tiller.

Follow instructions under “Customer Responsibilities”

and “Storage” sections of this Owner’s Manual.

IIVIPORTANT:

THIS UNIT IS EQUIPPED WITH AN

INTERNAL COMBUSTION ENGINE AND SHOULD NOT

BE USED ON OR NEAR ANY UNIMPROVED FOREST-
COVERED, BRUSH-COVERED OR GRASS COVERED
LAND UNLESS THE ENGINE'S EXHAUST SYSTEM IS
EQUIPPED

WITH

A

SPARK

ARRESTER

MEETING

APPLICABLE LOCAL LAWS (IF ANY). IF A SPARK
ARRESTER IS USED, IT SHOULD BE MAINTAINED IN

EFFECTIVE WORKING ORDER BY THE OPERATOR.

IN THE STATE OF CALIFORNIA, A SPARK ARRESTER IS
REQUIRED BY LAW {SECTION 4442 OFTHE CALIFORNIA

PUBLIC RESOURCES CODE). OTHER STATES MAY

HAVE SIMILAR LAWS. FEDERAL LAWS APPLY ON
FEDERAL LANDS. SEE YOUR AUTHORIZED SERVICE

CENTER/DEPARTMENT FOR SPARK ARRESTER.

TABLE OF CONTENTS

SAFETY RULES........................................................ 2
PRODUCT SPECIFICATIONS........................................ 3
CUSTOMER RESPONSIBILITIES ......................3,10-12

ASSEMBLY.............................................................. 4-5
OPERATION............ .................................................... 6-9

MAINTENANCE SCHEDULE...................................... 10

SERVICE & ADJUSTMENTS.................................... ..12-14
STORAGE ................... ...... ..................................... . 15

TROUBLESHOOTING ...... ......... ......... . 16

REPAIR PARTS-TILLER.............. ........ ..................... . 17-22

WARRANTY .................. ...................... ......................... . 23