NordicTrack E7SV NTEL07808.0 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

8. Attach an Outer Handlebar Cover (67) and the

Inner Handlebar Cover (68) around the Right
Handlebar Leg (60) with two M4 x 16mm

Screws (104).

Repeat this step for the other side of the

eiiipticai exerciser.

9. Apply a small amount of grease to the axle on

the Right Handlebar Leg (60) and to a 19mm
Wave Washer (66).

Identify the Right Pedal Arm (58), which is
marked with a “Right” sticker, and orient it as

shown.

Slide the 19mm Wave Washer (66) and the

Right Pedal Arm (58) onto the Right Handlebar
Leg (60).

Attach the Right Pedal Arm (58) with an M8 x

19mm Patch Screw (82), an Axle Cover (53),

and an M8 x 25mm Washer (98);

to avoid

breaking the Axle Cover, do not overtighten

the Patch Screw.

Repeat this step for the Left Pedal Arm (not

shown).