beautypg.com

NordicTrack E7SV NTEL07808.0 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

1. Begin pedaling or press any button on the

console to turn on the console.

A moment after you begin pedaling or press a but­
ton, a tone will sound, and the display will light.

2. Select a weight loss workout.

HOW TO USE A WEIGHT LOSS WORKOUT

To select a weight

loss workout, press

the desired Weight

Loss button. The

workout time and a

profile of the resis­

tance levels for the
workout will also
appear in the dis­

play.

3. Begin pedaling to start the workout.

Each workout is divided into 30 one-minute seg­
ments. One resistance level is programmed for

each segment. Note: The same resistance level
may be programmed for consecutive segments.

The resistance level for the first segment will
appear in the display for a few seconds. During
the workout, the workout profile will show your

progress (see the drawing above). The flashing
segment of the profile represents the current seg­
ment of the workout. The height of the flashing
segment indicates the resistance level for the cur­

rent segment. At the end of each segment of the

workout, a series of tones will sound and the next
segment of the profile will begin to flash. If a differ­
ent resistance level is programmed for the next
segment, the resistance level will appear in the
display for a few seconds to alert you. The resis­
tance of the pedals will then change.

If the resistance level for the current segment is

too high or too low, you can manually override the
setting by pressing the Silent Magnetic Resistance

buttons.

IMPORTANT: When the current seg­

ment of the workout ends, the pedals will

automatically adjust to the resistance level

programmed for the next segment.

The workout will continue in this way until the last
segment ends. To stop the workout at any time,
stop pedaling. A tone will sound and the time will
stop counting. To restart the workout, simply

resume pedaling.

4. Follow your progress with the display.

See step 4 on page 15.

5. Measure your heart rate if desired.

See step 5 on page 16.

6. When you are finished exercising, the console

will turn off automatically.

See step 6 on page 16.

18