Assembly – NordicTrack NTC59020 User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ASSEMBLY

Assembly requires two persons.

Place all parts of the exercise cycle in a cleared area and remove the packing

materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires the included tools and your own adjustable wrench

Use the drawings below to identify the small parts used in assembly. The number in parenthesis below each
drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers to the
quantity needed for assembly.

Note: Some small parts may have been pre-attached for shipping. If a part is

not in the parts bag, check to see if it has been pre-assembled.

1. Identify the Front Stabilizer (15). While another person

lifts the front of the Frame (1), attach the Front
Stabilizer to the Frame with four MS x 40mm Button
Screws (54) and four MS Split Washers (55).