Troy-Bilt 12001C - Manual (Page 20)

MAINTENANCE CHECKLIST
Before
Each Use Regularly
Every 25
HrsOf
Use
Every 75
Mrs Of
Use
Every 100
Hrs. Of
Use
After
Season
Are ignition switch wires securely attached? X
Make sure air cleaner assembly is secure. X
Check all nuts and bolts for tightness. X
Clean cooling system by removing debris
from cylinder fins and carburetor area. X
Check transmission lubricant.* X
^
X
Remove and service the air filters.
(service more frequently in dusty conditions)
X
1 !
Have engine exhaust ports cleaned by an
Authorized Tecumseh Engine Dealer.
X
Clean dirt and debris from the equipment. X
Clean and lubricate the tine shafts. X X
Check spark plug.**
i
!
X
’ After the first five (5) hours of use. Unless there is an obvious leak, the transmission
should not require that any lubricant be added.
** Annually or every 5 operating hours.
Note: For carburetor and engine speed adjustments, see your Authorized Tecumseh Service Outlet.
PARTS ORDERINC INFORMATION
If you should ever need any replacement parts for your Tiller, please use the exploded parts illus­
tration and parts listing which follow to determine which parts you’ll need to order.
You may order replacement parts directly from a local Authorized Dealer. Should you need to
order any replacement parts from the Factory, please see the address and telephone information on
the back cover of this Owner/Operator Manual.
20