Ariens 912 - Manual (Page 7)

Dealer Preparation for Operaition (Continued)
m
Mower Belt
Mower belt tends to “seat-in” during first few
hours of operation. Ariens recommends ad­
justment of belt tension after first five hours of
operation. Refer to Adjustments Section of
this manual.
Safety Interlock System
A DANGER: Failure of interlock, together
with improper operation of unit, could
result in severe personal injury.
Check the safety interlock system to make
sure that it is functioning properiy. Tractor
must not start uniess Speed Selector is in
neutral (N) and Mower Clutch is disengaged
(OUT). Engine MUST stop if operator leaves
seat when Speed Selector is in any drive posi­
tion or with Mower Clutch engaged (IN). Refer
to Repair Manual for adjustment or correction
of improper interlock function.
Delivery
Using the Owner’s Manual instruct the
customer on controls and operation of unit.
Emphasize safety and discuss the Safety
Precautions.
IMPORTANT: Remind customer to change oil in
engine crankcase after first two (2) hours and
adjust mower belt after five hours of operation.
Explain recommended
maintenance of unit.
lubrication and
Advise customer on adjustments, demonstrate
how to mount and dismount mower.
Expiain Ariens Company, Limited Warranty
Policy, fill out Original Purchaser Registration
Card, Parts and Repair Manuals order form and
return to Ariens Company. Place Model and
Serial Number on page (1) of this manual.
Give customer his Owner’s Manuai and engine
manufacturer instructions. Advise him to
thoroughiy read and understand them.
Registration
Complete Riding Mower Warranty Registration
Form and mail original copy to Ariens Com­
pany.
Warranty is registered under model and serial
number found on plate attached to frame near
engine.
IP'