Crestron electronic on wall speaker - Manual (Page 38)

Audio Distribution System Crestron Adagio™ AADS
Edit Presets Control
Edit Presets
1: Party
SOURCE
ROOM
PRESET
MENU
BKLT
SCHED
DISPLAY
MORE
• To configure a preset, press up or down on the selection control to display
the preset to be configured and press SELECT.
• To add rooms to the preset, press the corresponding room buttons on the
AADS or AAE (if connected). The room button’s LED will turn on. Press
again to remove the room from the preset group. The room button’s LED
will turn off.
• To select a source for the preset:
⇒ Press up or down on the selection control until the word Source is
displayed and press SELECT.
Select Preset Source
Edit Preset 1
Source
SOURCE
ROOM
PRESET
MENU
BKLT
SCHED
DISPLAY
MORE
⇒
⇒
⇒
Press up or down on the selection control until the desired source is
displayed and press SELECT.
• To change the name of the preset:
Press up or down on the selection control until the word Name is
displayed and press SELECT.
Press the selection control up or down to display any of the built-in
preset names and press the SELECT button.
Select Preset Name
Enter Preset 1 Name
[Party]
SOURCE
ROOM
PRESET
MENU
BKLT
SCHED
DISPLAY
MORE
⇒ To enter a custom name, press the selection control up until [Custom
Name] is displayed and press the SELECT button.
34 • Audio Distribution System: Adagio AADS Operations Guide – DOC. 6458