Cadillac 2010 DTS User Manual

Page 402

Using the Tire Sealant and Compressor
Kit without Sealant to Inflate a Tire
(Not Punctured)

To use the air compressor to inflate a tire with air only
and not sealant:

Always do a safety check first. See If a Tire Goes Flat
on page 6‑76.

1. Remove the tire sealant and compressor kit from

2. Unwrap the air only hose (E) and the power

plug (G).

3. Place the kit on the ground.

Make sure the tire valve stem is positioned close to
the ground so the hose will reach it.

4. Remove the tire valve stem cap from the flat tire by

turning it counterclockwise.

5. Attach the air only hose (E) onto the tire valve

stem by turning it clockwise until it is tight.

6. Plug the power plug (G) into the accessory power

outlet in the vehicle. Unplug all items from other
accessory power outlets. See Accessory Power
Outlet(s) on page 4‑34.

If the vehicle has an accessory power outlet, do
not use the cigarette lighter.

If the vehicle only has a cigarette lighter, use the
cigarette lighter.

Do not pinch the power plug cord in the door or
window.

7. Start the vehicle. The vehicle must be running

while using the air compressor.

8. Turn the selector switch (B) counterclockwise to

the Air Only position.

6-82