beautypg.com

Pairing, Pairing a phone – Cadillac 2010 DTS User Manual

Page 277

background image

Pairing

A Bluetooth enabled cell phone must be paired to the
in‐vehicle Bluetooth system first and then connected
to the vehicle before it can be used. See the cell
phone manufacturers user guide for Bluetooth functions
before pairing the cell phone. If a Bluetooth phone is
not connected, calls will be made using OnStar

®

Hands‐Free Calling, if available. Refer to the OnStar
owner's guide for more information.

Pairing Information:

.

Up to five cell phones can be paired to the
in‐vehicle Bluetooth system.

.

The pairing process is disabled when the vehicle is
moving.

.

The in‐vehicle Bluetooth system automatically links
with the first available paired cell phone in the
order the phone was paired.

.

Only one paired cell phone can be connected to
the in‐vehicle Bluetooth system at a time.

.

Pairing should only need to be completed once,
unless changes to the pairing information have
been made or the phone is deleted.

To link to a different paired phone, see Linking to a
Different Phone later in this section.

Pairing a Phone

1. Press and hold

b g

for two seconds. The system

responds with “Ready” followed by a tone.

2. Say “Bluetooth”. The system responds with

“Bluetooth ready” followed by a tone.

3. Say “Pair”. The system responds with instructions

and a four digit PIN number. The PIN number will
be used in Step 4.

4. Start the Pairing process on the cell phone that will

be paired to the vehicle. Reference the cell phone
manufacturers user guide for information on this
process.

Locate the device named “General Motors” in the
list on the cellular phone and follow the instructions
on the cell phone to enter the four digit PIN
number that was provided in Step 3.

5. The system prompts for a name for the phone. Use

a name that best describes the phone. This name
will be used to indicate which phone is connected.
The system then confirms the name provided.

6. The system responds with “ has

been successfully paired” after the pairing process
is complete.

7. Repeat Steps 1 through 7 for additional phones to

be paired.

4-111