CDA SV310SS - Manual (Page 16)

Cooking timer menu screen
To set a cooking timer, touch in the bottom left of the cooking menu screen. The cooking timer screen will open and
the available timer options will show. If the end timer is not available, then it is shown in grey.
To set a cooking time
The oven is equipped with a timer to allow you to set the oven to cook for a specific period of time. This option is
available on all manual and special cooking programmes.
Touch to select cooking time, then touch or until the display shows the required number of minutes for the
programme. To confirm the cooking time, touch .
To set the end time
The timer also allows you to set an end time on any manual cooking programmes – this will switch the oven on and off
at the times you need.
Touch to select end time. To change the time, touch either hours or minutes. The digits will show in blue when
inactive, and red when active. Touch or to change the time. To confirm the end time, touch .
When the displays show the required times, touch to confirm the timers and return to the cooking menu screen or
to return without setting the timer
It is possible to change the cooking timers after the programme has been set. Simply touch to return to the cooking
timer menu screen and the adjust the times as above. If the oven had not yet started cooking, both cooking time and
end time can be changed. If the oven had started cooking, only cooking time can be changed.
At the end of a timed cooking programme, the oven will beep intermittently and the screen will show a flag. To stop the
beep, touch the flag icon.
If an end time is set, once the start icon is touched the hourglass will turn in the bottom left hand corner until the
programme begins.
Please note:
On the auto cooking programmes, the oven will recalculate cooking times if necessary, for example if the oven is already
hot from use when another programme is set. When the oven beeps to confirm preheat is complete, the new time will
show on the display.
15