SINGER W1499 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

BEFORE SEWING
1. Fit the machine plug into
the machine.
2. Plug the machine to the
power supply.
3. Sewing speed can be varied
by the speed controller.
(BE SURE TO FIT A
CORRECT PLUG TO SUPPLY
CORD)
1. Remove or install lamp from
inside of face cover.
2. Open face cover in direction
of arrow.
3. Remove lamp by unscrewing
it counter clockwise.
4. Install a new bulb by screw
ing it in clockwise.
5. Use only a 120V » 1SW
(Max) "Hi-Light" brand re-
pl«:ement sewing machine
lamp. Available from your
Riccar stockist.
Important: When leaving the machine unattended, servicing, changing lamps
or removing covers, disconnect from the supply by removing
plug from the socket outlet.