Removing bobbin case and bobbin – SINGER W1499 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REMOVING BOBBIN CASE AND BOBBIN
1. Raise needle to its highest
position and open the
shuttle race cover.
bobbin case and pull bob
bin case out of machine.
3. Release the latch and bob
bin will fall out easily.
inserting
bobbin
into
bobbin
case
1. Pull off 5cm of thread
from bobbin and insert it
into bobbin case as shown.
2. Guide the end of thread
into slot.
Tensionspring
3. Pull into slot and under
tension spring and draw
out about
10 cm of
thread.