Needle thread breaks – SINGER W1411 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TROUBLE SHOOTING: CAUSES AND REMEDIES
NEEDLE THREAD BREAKS
CAUSE
REMEDY
Needle not properly threaded
Thread tension too tight
Something wrong with the needle
Thread it too heavy for needle
Thread check spring is broken
Needle not properly inserted
Needle plate, shuttle or sewing foot damaged
Thread properly
Loosen tension
Replace needle
Change
Have a new spring fitted
Insert needle properly
Replace
BOBBIN THREAD BREAKS
Bobbin thread entangled because of incorrectly wound bobbin
Bobbin thread not under tension spring on bobbin case
Wind bobbin correctly
Thread bobbin correctly
STITCHES’ARE LEFT OUT
Needle not properly fitted on needle bar
Needle bent or blunt
Needle worn
Fit needle properly
Rtiptace
Replace
NEEDLE BREAKS
Needle bent
Needle not properly fitted
Fabric too heavy or too hard
You are pulling on the fabric
Replace
Fit needle properly
Use needle of correct size
Do not pull
3 6 ^