SINGER W1411 - Manual (Page 31)

SEWING ZIPPERS
f-, esserfoot....................................... zipper foot
Pattern selector...................................M ( c ID )
Stitch length dial..................................1 to 4
Raise the foot and the needle to its highest position by turning
the balance wheel towards you. Replace the foot with the zipper
foot.
1. Pin or baste the zipper tape to the fabric and place the work­
piece in position under the foot.
Attach snap on zipper foot so that the needle passes on its
left hand side.
• When starting to sew, both needle and bobbin threads ends should
be put under the foot.
2. Sew on the right side of the zipper by guiding zipper teeth
as close as possible to the needle drop. Before the foot reaches
the slider on the zipper tape, raise the foot and open the
zipper by keeping the needle in the fabric.
Lower the foot and sew on theremaider of the seam.
3. To sew the left side zipper change position of foot for bring
the foot to the left side of the needle. Sew on in the same
way as you did on the right side of zipper.
28
-
Zipper foot
\
Element
Fig. 3