SINGER W1044 - Manual (Page 7)

5. INSERTING AND REMOVING THE BOBBIN CASE
1. Raise the presser bar by lifting the presser bar lifter
" vo.
4 . After threading the bobbin case hold its latnh /P- 7, u
position finger opposite the notch at the top of the sh forefinger of the left hand, with its
iFig 7). shuttle race and replace it on the centre stud of the shuttle
5 . Then release the latch and press the hnhhin ^ u i
6. Allow the end at the thread to hang free S'"''' ™«' »•e end of the atud
S. Puth hath Slide Plate, To re™.e the hohhln ease do al, the aho.e In reverse order.
Fig 6
Fig 7