I2 iw??? ? s – SINGER W1044 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
10. REGULATING THE THREAD TENSION
For ordinary stitching the tension of the upper
and lower threads should be equal so as to lock
both threads in the centre of the material (Fig.
13). If one tension is stronger than the other,
imperfect stitching will result. Fine materials
require a light tension, while heavy matericis
require more tension to obtain a perfect stitch.
TO INCREASE the tension, turn the thread
tension dial (Fig. 12) clockwise.
TO LESSEN the tension, turn the thread tension
dial in the opposite direction. (When regulat
ing the tension always have the presser foot
down),
As all machines are correctly adjusted before leaving the factory and
readjusted before the dealer delivers them to you, the lower tension
seldom requires to be altered, but, if this becomes necessary, tighten
the screw holding the tension spring on the outside of the bobbin case
for more tension, or loosen the screw slightly for lesser tension (Fig. 14).
Fig 12
Needle Thread Tension too strong
mm
i
2 iw??? ? S
Needle Thread Tension too weak
Fig 13