Attachment foot, The edgestitches, Edgestitcher – SINGER W7911 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ъ
-'i
э
а
а
э
э
э
э
э
э
э
э
э
а
а
э
о
23
ATTACHMENT FOOT
In
order
to
attach
the
binder,
edgestitcher
anrl
the
hemmers, it is necessary to remove the presser foot and
replace it with the attachment foot. Fig. 26.
Mount
binder,
edgestitcher
or
hemmers
sliding
the
attachment
to
the
left
as
far
as
possible
and
tighten
screw.
The mounting slot enables you to sew as close to
or as far away from the edge as desired. Just move the
attachment
to
the
correct
position
before
tightening
the
mounting screw.
Fig. 26
THE EDGESTITCHES
The
edgestitcher
is
used
in
mak
ing
lace
insertions,
edgings
and
pip
ings.
The
slots
serve
as
guides.
To
sew
lace
edging
to
fabric,
place
the
material you want on top in slot. Fig.
27, and the other piece in slot 4. Fig. 28.
To trim with a wide piping, place
the fabric in slot 4, and the fold of
the piping to the left in slot 3, for a narrow piping, plac
edge of the piping to the right in slot 3.
Slot 5 may be used as a guide in stitching a french
Fig, 27
seam.