SINGER W7911 - Manual (Page 13)

13
Fig. 17
Fig. 14
Fig. 18
ADJUSTING PRESSURE AND FEEDING OF FABRIC
GENERAL SEWING. Usually for straight sewing, the pressure bar cap or darner release,
Fig. 18, is at its lowest position and the drop feed buttons are both set at the same height
Tress up button all the way down and it will spring back to the correct height) Fig. 19.
SEWING THIN OR LIGHT WEIGHT FABRICS.
When lighter pressure is required to sew satisfactorily on
thin silk or filmy material, the pressure cap should be about
halfway down. Release all the way by pressing the snap lock,
A, Fig. 20, and then press cap B down again to half way spot.
Lower the feed slightly by pressing the down button (Fig. 19)
'
to the red line. Fig. 19