Removing machine from cabinet – SINGER 177 User Manual

Page 62

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

removing machine

from cabinet

IMPORTANT:

• Do not attempt to remove hinges from cabinet

as this may result in damage to cabinet.

• Puil cabinet away from wall to avoid damage

to wall or machine.

• Remove power-line plug from electrical

supply.

TO REMOVE MACHINE FROM CABINET

1. Tilt machine back until it rests on hinges.

2. Loosen set screws that hold machine on

hinge pins by turning them counterclockwise.

3. Lift machine straight up and off pins. For

ease of removal, stand behind cabinet when

lifting machine.

TO REPLACE MACHINE IN CABINET

Reverse the procedure used for removal of

machine.

• Be sure set screws in machine are unscrewed

far enough to clear openings for hinge pins.

• To keep hinge pins pointing up, slip an elastic

rubber band around both pins, making sure

the elastic band is over the shoulder of each

hinge as illustrated.

• Be sure set screws are firmly tightened

against hinge pins before lowering machine

into cabinet.