SINGER 177 User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Now that you have wound the bobbin and

threaded the needle, you will need to raise the

bobbin thread through the hole in the needle

plate.

1. Hold needle thread lightly with left hand and

turn hand wheel slowly toward you so that

needle enters needle plate.

2. Continue turning hand wheel and holding

needle thread until needle rises and brings

up bobbin thread in a loop.

3. Undo the loop with your fingers.

4. Place both needle and bobbin threads under

the presser foot, and draw them diagonally

to the back of the machine.

RAISING THE BOBBIN THREAD