SINGER 14U64A User Manual
SINGER Sewing machines
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
This manual is related to the following products:
Table of contents
Document Outline
- 14
- 14Ü64A
- 4. Chair, off and test sew
- Adjust thread tension to suit the type of material and si2e of the thread used. The thread tension dials on this machine are a one-tum system and as the number on the thread tension dials increases, the thread tension becomes tighter.
- 1) 2-needle. 4-thread overedge stitching.
- Be sure the threads are correctly threaded otherwise proper thread tension cannot be obtained (See page 6).
- Set each of the thread tension dials to the settings shown below and test sew.
- With following figure as reference, adjust the thread tension dials to obtain correct tension.
- 2) Standard 1-needle, 3-thread overedge stitching
- This machine can do I -needle. 3-thread overedge stitching by using only the right needle.
- Be sure the threads are correctly threaded otherwise proper thread tension cannot be ohtzined (See page 6).
- Set each of the thread tension dials to the settings shown below and test sew.
- With following figure as reference, adjust the thread tension dials to obtain correct tension.
- 6. Hcv7 to Eojost Stitch length
- 7. Hcvr to ae|ost overedge seam width
- 12. Vcristicn stitch
- 13. r-cv;t3 rsp^£C3 r.ssd^ss
- 14. Hcv; to rsplccs st£t:oo£ry koifs
- 15. How to exchange light bulb
- 16, to £¿7^31 crasser foot pressi
- 18, Reasons for poor stitches ar.o hc*A* tc ntaks Ezyss’lrr.ent
- 21. Specificatio!