SINGER W1266 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
35
Fig. 60
EDGESTITCHER
The edgestitcher is used in mak
ing dainty lace insertions, edgings
and piping.
The
slots
in
the
edgestitcher
serve as guides in sewing together
various pieces of material. If you
want to sew lace, lace and embroi
dery, or lace and tucked strips togeth
er, place the piece of material that
will be on top in slot 1 (Fig. 61)
and the lower fabric in slot 4. For
instance, if you are sewing lace edg
ing to a finished edge of fabric place
the fabric in slot 1 and the lace in
slot 4 Fig. 62.
ATTACHMENTS
Be sure to set decorative design at number Al
manual position.
ATTACHMENT FOOT
order to attach the binder, edgestitcher and
the hernmers, it is necessary to remove the presser
replace it with the attachment foot. Fig. 60
Mount binder, edgestitcher or hernmers sliding
he attachment to the left as far as possible and
tighten screw..
The mounting slot enables you to sew as close
to or as far away from the edge as desired. Just move
tne attachment to the correct position before tighten
ing the mounting screw.
Fig. 61
Fig. 62