Overlook stitching (overcasting) – SINGER W511 User Manual

Page 26

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

OVERLOOK STITCHING (OVERCASTING)

Overcasting

Three Step Zigzag Overcasting

Pattern Selector and

Zigzag Width Control Dial

PROCEDURE:
• Overlook stitching is used for seaming and finishing the cut edge of

knit fabrics, all in one operation.

• This overlook stitch is especially good for stretch fabrics such as

double knit and jersey and will give a firm, neat edge finish.

• For a finished 1/4" seam, guide your fabric at the right hand

edge of the needle hole as shown.

• When your pattern calls for a 5/8" seam allowance, guide your

fabric along the

" guide line on the needle plate and sew your

seam. Then trim off the excess fabric close to the stitching. On

some fabrics this method is preferable.

Note: The three step zigzag stitch can also be used for overcasting.