SINGER W231 - Manual (Page 6)

Ute BoJfJUn Qaie.
Before threadinji the bobbin case, study Fig. 5, 6 and 7 to get a
general idea as to how it is done.
1. Hold the bobbin case with your left hand and put the bobbin
into the bobbin case with your right, leaving about two inches
of the thread end unwound
(Fig. 5). As the bobbin is
being inserted in the bob­
bin case, the thread flow,
you will note, in clockw'ise
(Fig. 5).
2. While holding the bobbin
case as before, grasp the
thread end with your right
hand, guide it into the
cross slot (Fig. 6).
3, I'hen pull it through under the tension spring of the
bobbin case (P'ig. 6) until it enters the delivery eye
(Fig. 7).
...