R.e^i4icuim4f the stucu jle*ix^tlt – SINGER W231 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

R.e^i4icUiM4f the StUcU Jle*ix^tlt

^ondAMsAxi SeiuiHif

The length of the stitch can be changed with the stitch length

dial (Fig. 23). In order to set a certain length of stitch, turn

the dial from 0~4 until the selected number on the scale is

facing the alignment mark on the stitch length dial. The

length of the stitch is increasing from 0~4. The normal

stitch is 2.

(leAfXxJatiHAf tUe. StitcU jHetUftU

/^e4*e^Ue SetiUAtf

a. Regulate the length of the stitch as for forward sewing

(see above).

b. Push reverse stitch button located above the stitch length

(Fig. 23) as far as it will go. The machine will then sew

in reverse with the same stitch length as previously select

ed. During reverse sewing, push the reverse stitch button

all the time. After release the machine resumes forward

sewing with the same stitch length.

UtA StiioU JBexu^tU

Sewixuf

The stitch length dial regulates the length of the zigzag stitch for zigzag sewing in the same

manner as for straight sewing. In order to produce the "Satin Stitch” which is the closest zigzag

stitch, set the stitch length dial close to 0.

Fig. 23