SINGER W231 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

tUe ^i4jc

To insert a zigzag disc into the machine follow these instructions;

1. Pull lid ;A) open.

2. Push zig zag width dial :Bi to the e.xtrenie right, and keep it

there during insertion.

‘

3. Insert disc onto a.xle ;Ci. Turn disc until it slips down and

the retaining pin ;D) enters hole ; E; in disc.

4. Release dial (B).

5. Close lid (Ah

To remove the disc, open the lid, push dial B) to the right and

pull disc up.

Now you can insert .another disc to produce another design.

Cams attached to the machine)

Fig. 26