The foot hemmer – SINGER 15-90 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THE FOOT HEMMER
36
The foot hemmer may be used for hemming the
edge of the material, making hemmed and felled
seams and for hemming and sewing on lace in one
operation.
e/bobff
F
ig
.
35.
F
oot
H
emmer
To Attach the Foot Hemmer:
Raise the needle to its highest point, remove the
presser foot and attach the foot hemmer to the
presser bar in place of the presser foot.
Pull up the bobbin thread as instructed on page 15.
To Start the Hem at the Edge;
(1) Fold the edge of the material over about
}/s
inch
at the starting point for a distance of about
one inch.
(2) Place the material in the foot hemmer with the
folded edge at the back of the hemmer leading
at an angle to the right.