To regulate pressure on presser foot, Need i es in containers marked, Singer – SINGER 15-90 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
19
To feed the material from you, push down the
stitch regulating lever X Fig. 17 as far as it will go.
To feed the material toward you, raise the stitch
regulating lever X as high as it will go.
The direction of feeding can be reversed at any
point of a seam without removing the work from
the machine.
The reverse feed makes it easy to do 'Tack tack
ing” and to fasten the ends of seams.
TO REGULATE PRESSURE ON
PRESSER FOOT
For ordinary sewing, the pressure of the presser
foot on the material seldom requires changing. Heavy
materials require more pressure than light weight
materials. The pressure should be only heavy enough
to prevent the material from rising with the needle
and to enable the feed to move the work along
evenly. To increase the pressure, turn the thumb
screw V, Fig. 16 clockwise or downward. To lighten
the pressure, turn the thumb screw so that it screws
upvrard.
TO REGULATE THE DIRECTION OF FEED
SINGER
Needles should be used
in
SINGER
Machines
These Needles and their Containers
are marked wi th the
Company’s Trade Mark "SIMANCO.*” i
Need I es in Containers marked
"FOR SINGER MACHINES”
are NOT
SINGER
made needles.
2