Canon EOS 5D - Manual (Page 129)

129
wPrinting with PictBridge
With step 4, select the item. When
is displayed, press the
button. You can then set
the parameters for fine adjustments.
The parameters that can be adjusted
for the selected item are shown in the
table below.
Turn the <5> dial to select the item
to be adjusted, then press <0>.
Printing Adjustments (k: Adjustable)
Adjustment of Printing Effects
Item
Off / On / Vivid /
Natural
Natural M
B/W / Cool tone /
Warm tone
Brightness k k k
Adjust levels – k k
k Brightener k k k
Red-eye corr. k k k
Detail
set.
Contrast
–
k k
Saturation k
– Color tone k
Color balance k
After making fine adjustments for the printing effect, if you do step 4 again to
change the printing effect’s setting, the adjustments will all revert to the
default.
When [Default] is selected, the printing adjustments can not be adjusted.