The set of hemmers, Darning spring – SINGER W8931 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
34
THE SET OF HEMMERS
Before attaching any of the hemmer. Be sure bob
bin thread is pulled up. Then, with hemmer in place,
hold top thread loosely and turn handweel one full
turn toward you, making a loop under hemmer. Grasp
bobbin thread with both hands and slip horizontally
under hemmer toward back. Bobbin thread will catch
loop and carry upper thread to back of hemmer.
Fold material to suit for two inches along edge, hold
at each end of fold. Slip fold into guide and up over
spoon (Fig. 48). Fold hem in material back of hemmer
fasten with point of needle. Pull on threads gently as you start stitching.
Pig. 48
Draw forward to end of hem and
U/
DARNING SPRING
HOW TO ATTACH
Remove presser foot, unthread needle, place darner
spring, on needle and slip hook up over needle clamp.
PATCHING AND MONOGRAMMING
See Page 18 Fig. 23.