Attachment foot, The edgestitches, Attachments -29 – SINGER W8931 User Manual
Page 30: Edgestitcher
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

\
mtmi
30
p;g. 38
ATTACHMENT FOOT
In order to attach the binder, edgestitcher and the
hemmers, it is necessary to remove the presser foot and
replace it with the attachment foot. Fig. 38.
Mount binder, edgestitcher or hemmers sliding the
attachment to the left as far as possible and tighten
screw.
The mounting slot enables you to sew as close to
or as far away from the edge as desired. lust move the
attachment to the correct position before tightening the
mounting screw.
THE EDGESTITCHES
The edgestitcher is used in mak
ing lace insertions, edgings and pip
ing. The slots serve as guides. To
sew lace edging to fabric, place the
material you want on top in slot. Fig.
39, and the other piece in slot 4.
To trim with a wide piping, place
the fabric in slot 4, and the fold of
the piping to the left in slot 3, for a narrow piping, place the fabrio in slot 2 and the folded
edge of the piping to the right in slot 3.
Slot 5 may be used as a guide in stitching a french seam.
3
c
t
f
c
'k
¥
€
#
t
f