SINGER 7106 - Manual (Page 28)

1 1 1 i i
stitch Width Seiector
ADJUSTING WIDTH OF THE DESIGN
Before moving stitch width selector, always
raise needle above fabric.
To produce a stitch pattern, the stitch width
selector must be moved from j toward the
right. The further you move the selector lever
toward the right, the wider your stitch will be.
Incorrect
Correct
ADJUSTING STITCH BALANCE
When you are using stretch stitch patterns,
you may need to adjust the stitch balance dial
in order to correct the appearance of the
stitch.
Before you move the dial from its neutral po­
sition ( 4 symbol on dial aligned with line
— on panel), make a test sample. If adjust­
ment is required stitch slowly and move the
dial as illustrated.
• Turn dial down to bring stitches of the pat­
terns together (ill. A). •
• Turn dial up to separate stitches of the pat­
terns (ill. B).
Always return the dial to its neutral position
after sewing stretch stitch patterns.
26