How to thread the bobbin case – SINGER W1514 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

HOW TO THREAD THE BOBBIN CASE|

Refer to Figs. 6, 7 and 8 to familiarize yourself with the procedure. Hold the bobbin

case in your left hand with the tongue pointing up. Let about two inches of thread

hang free from the bobbin, and insert bobbin into case so that tljiread will be rotating

counter-clockwise.

Guide the thread end through the slot on the side of the case aid under the tension

spring until it enters the small notch on the edge of the spring.

Fig. 6

Fig. 7

Fig. 8

.. -:i

■■'I

-.■m

^W'