The rüffler (cont’d) – SINGER 221K Featherweight User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
36
THE RÜFFLER (Cont’d)
Activating Parts. Ruffling blade and
separator blade
are of blue steel and
hold material to be gathered between
them.
Ruffling blade
forms gathers or
pleats
by
carrying
fabric
to
needle
according
to
spacing
and
fullness
to
which
ruffler
is
adjusted.
Separator
guide
is slotted to guide seam edges
evenly
and
to
separate
ruffled
strip
from material to which ruffle is at
tached.
Preparation
• Raise needle to highest point.
•
Locate ruffler on presser bar with
fork arm over needle clamp screw.
Securely
tighten
both
presser
bar
and needle clamp screws.
Gathering
•
Set adjusting lever on Number 1
setting
and
throw
adjusting
finger
out of action.
•
Turn adjusting screw for amount of
fullness desired and set stitch length
to space fullness. Turn screw in for
more
fullness;
turn
out
for
less
fullness.