The rüffler – SINGER 221K Featherweight User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
35
THE RÜFFLER
FORK
ARM>^,
ADJUSTING
LEVER
ADJUSTING
FINGER
ADJUSTING
SCREW
SEPARATOR RUFFLING ^SEPARATOR
BLADE
BLADE
GUIDE
This attachment offers a simple and
effective
way
to
make
gathered
and
pleated ruffles. Ruffles may be made
separately or made and applied at the
same time.
1. Adjusting lever sets ruffler for gathers
or pleats.
Number 1 space setting is for
gathers
and
places
fullness
at
every
stitch. Numbers 6 and 12 are space
settings for pleats, spacing them 6 or
12
stitches
apart.
Star
is
for
plain
stitching
and
is
used
when
grouping
gathers or pleats.
2.
Adjusting finger is used only for
pleating
and affects width of pleat. It
is
disengaged
by
bringing
it
out
of
contact with adjusting screw.
3. Adjusting screw regulates fullness of
gathers or pleats.
When turned in to its
limit
with
adjusting
finger
in
place,
attachment is set for its deepest pleat.
When turned outward to its limit, with
adjusting finger out of action, rufiler
gives only a hint of fullness.
Adjusting Points