Tcj:l connecting machine to power source, Foot control, Sewing light – SINGER 2250 TRADITION User Manual
Page 13: Connecting machine to power source
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
tcj:l Connecting machine to power source
Connect the machine to a power source as illustrated. (1)
This appliance is equipped with a polarized plug which must be
used with the appropriate polarized outlet. (2)
Attention:
Unplug power cord when machine is not in use.
Foot control
The foot control pedal regulates the sewing speed. (3)
Attention:
Consult a qualified electrician if in doubt of how to connect
machine to power source.
Unplug power cord when machine is not in use.
The foot control must be used with the appliance by KD-1902 /
FC-1902 (110-120V area) / KD-2902 (220-240V area)
manufactured
by
ZHEJIANG
FOUNDER
MOTOR
CORPORATION LTD. (China)
40316B (110-125V area) / 4C-326G (230V area) manufactured
by Wakaho Electric Ind. Co., Ltd. (Vietnam)
Sewing light
Press main switch (A) to " I" for power and light.
IMPORTANT NOTICE
For appliance with a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only one way. If it does
not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the proper outlet. Do
not modify the plug in any way.
a. Polarized attachment plug
b. Conductor intended to be grounded